|
|
{{TableOfContents}}
|
|
This is an index of all the variables used by Fuego:
|
This is an index of all the variables used by Fuego:
|
|
|
{{{#!YellowBlockFIXTHIS - I don't have all the fuego variables documented here yet
|
|
See also Core interfaces}}}
|
See also [[Core interfaces]]}}}
|
|
tools.sh based on PLATFORM * AS: name of the assembler * set by tools.sh based on PLATFORM * commonly used during the build phase (in the function test_build)
|
= A = * ARCHITECTURE: the processor architecture of the target board * defined in the board file for a target * used by toolchain and build scripts for building the tests * ''NOTE: this appears to only be used by iozone.sh'' * sample: arm * ARCH: architecture used by the toolchain * sample: arm * set by [[tools.sh]] based on PLATFORM * AS: name of the assembler * set by [[tools.sh]] based on PLATFORM * commonly used during the build phase (in the function [[function_test_build|test_build]])
|
|
|
= B = * BAUD : Baud rate to be used with the serialport * defined in the board file for a target * used by serial transport * sample: "115200" * BOARD_TESTDIR : directory on the target board where test data will be placed * defined in the board file for a target * sample: "/home/fuego"
|
|
tools.sh based on PLATFORM * commonly used during the build phase (in the function test_build) * sample: arm-linux-gnueabihf-gcc * CONFIGURE_FLAGS: flags used with the 'configure' program * set by tools.sh based on PLATFORM * commonly used during the build phase (in the function test_build) * CROSS_COMPILE: cross-compile prefix used for kernel builds * set by tools.sh based on PLATFORM * sample: arm-linux-gnueabihf- * NOTE: this is often $PREFIX followed by a single dash * CPP: name of the C pre-processor * set by tools.sh based on PLATFORM * CXX: name of the C++ compiler * set by tools.sh based on PLATFORM * CXXCPP: name of the C++ pre-processor * set by tools.sh based on PLATFORM
|
= C = * CC: name of the C compiler * set by [[tools.sh]] based on PLATFORM * commonly used during the build phase (in the function [[function_test_build|test_build]]) * sample: arm-linux-gnueabihf-gcc * CONFIGURE_FLAGS: flags used with the 'configure' program * set by [[tools.sh]] based on PLATFORM * commonly used during the build phase (in the function [[function_test_build|test_build]]) * CROSS_COMPILE: cross-compile prefix used for kernel builds * set by [[tools.sh]] based on PLATFORM * sample: arm-linux-gnueabihf- * NOTE: this is often $PREFIX followed by a single dash * CPP: name of the C pre-processor * set by [[tools.sh]] based on PLATFORM * CXX: name of the C++ compiler * set by [[tools.sh]] based on PLATFORM * CXXCPP: name of the C++ pre-processor * set by [[tools.sh]] based on PLATFORM
|
|
|
= F = * FUEGO_ENGINE_PATH: root directory for fuego system (the "engine") * sample: /home/jenkins * FUEGO_HOME: home directory on the target that fuego uses for operations * sample: /home/a * FUEGO_LOG_PATH: root directory for test logs * sample: /home/jenkins/logs * FUEGO_PARSER_PATH: root directory for fuego parser system * sample: /home/jenkins/scripts/parser * FUEGO_SCRIPTS_PATH: root directory for fuego scripts * sample: /home/jenkins/scripts * FUEGO_TESTS_PATH: root directory for fuego tests directories * sample: /home/jenkins/tests
|
|
|
= G = * GEN_TESTRES_FILE: set to the value of TEST_RES, when a BATCH_TESTPLAN is in effect
|
|
|
= I = * IO_TIME_SERIAL: Time required for echoing the whole command and response * defined in the board file * used by the transport functions * sample: 0.1 * IPADDR: IP address of the target board * defined in the board file * used by the transport functions * sample: 10.0.1.74
|
|
tools.sh based on PLATFORM * sample: arm-linux-gnueabihf-ld * LOGIN: login account name for the target * defined in the board file for the target * used by the transport functions * the account on the target should have sufficient rights to run a variety of tests and perform a variety of operations on the target * sample: root
|
= L = * LD: name of the linker * set by [[tools.sh]] based on PLATFORM * sample: arm-linux-gnueabihf-ld * LOGIN: login account name for the target * defined in the board file for the target * used by the transport functions * the account on the target should have sufficient rights to run a variety of tests and perform a variety of operations on the target * sample: root
|
|
|
= M = * MMC_DEV: device filename for an MMC device on the target * defined in the board file * used by filesystem test specs * sample: /dev/mmcblk0p2 * MMC_MP: mount point for a filesystem on an MMC device on the target * defined in the board file * used by filesystem test specs * sample: /mnt/mmc * MOUNT_BLOCKDEV: device filename for a block device on the target * defined in a filesystem test spec * e.g. in (bonnie, fio, ffsb, iozone, synctest, aiostress, dbench, tiobench).spec * usually references either MMC_DEV, SATA_DEV or USB_DEV, depending on what the test spec indicates to test * sample: /dev/sda1 * MOUNT_POINT: mount point for a filesystem to be tested on the target * defined in a filesystem test spec * e.g. in (bonnie, fio, ffsb, iozone, synctest, aiostress, dbench, tiobench).spec * usually references either MMC_MP, SATA_MP, or USB_MP, depending on what the test spec indicates to test * sample: /mnt/sata
|
|
|
= O = * OF_ROOT: root of overlay system * sample: /home/jenkins/overlays/
|
|
tools.sh based on PLATFORM * sample: arm-linux-gnueabihf * NOTE: see also CROSS_COMPILE
|
= P = * PASSWORD: password used with to login to the target board * defined in the board file for a target * used by the transport functions * it can be the empty string: "" * sample: mypass * PLATFORM: name of the target "platform" This is used to identify the toolchain used for building tests * defined in the board file * used in tools.sh * sample: qemu-armv7hf * PREFIX: toolchain prefix * set by [[tools.sh]] based on PLATFORM * sample: arm-linux-gnueabihf * NOTE: see also CROSS_COMPILE
|
|
|
= R = * REP_DIR: directory where reports are stored * sample: /home/jenkins/logs/logruns/ * REP_GEN: report generator program * sample: /home/jenkins/scripts/loggen/gentexml.py * REP_LOGGEN: program used to generate report logs? * sample: /home/jenkins/scripts/loggen/loggen.py
|
|
|
= S = * SATA_DEV: device node filename for a SATA device on the target * defined in the board file * used by filesystem tests * sample: /dev/sda1 * SATA_MP: mount point for a filesystem on a SATA device on the target * used by filesystem tests * sample: /mnt/sata * SRV_IP: IP address of server machine (host machine where fuego runs) * defined in base-board.fuegoclass * obtained dynamically using the 'ip' command * can be defined in a board file for a target, using an 'override' command * used by networking tests (NetPIPE, iperf, netperf) * sample: 10.0.1.1 * SSH_PORT: port to use for ssh connections on the target * defined in the board file for the target * the default port for sshd is 22 * sample: 22 * SERIAL: port to use for serial connections on the target * defined in the board file for the target * The device file name as detected in Docker container * sample: ttyACM0
|
|
|
= T = * TESTLOG: full path to log for a particular test * sample: /home/jenkins/logs/Functional.bzip2/testlogs/bbb.2016-06-24_18-12-53.2.log * TEST_RES: full path to JSON results file for a test * sample: /home/jenkins/logs/Functional.bzip2/testlogs/bbb.2016-06-24_18-12-53.2.res.json * sample contents: * TESTDIR: name of the directory for a particular test * this is just the directory name, not the full path (see $TEST_HOME) * this is also used as the reference parse log prefix * sample: Functional.bzip2 * TEST_HOME: full path to the root of the test directory * sample: /home/jenkins/tests/Functional.bzip2different platforms * TRANSPORT: type of connection between the host system and the target system * defined in the board file for the target * possible values: ssh, serial, ttc * others anticipated are: adb, lava * used by the transport functions * sample: ssh * TTC_TARGET: target name used with 'ttc' command * defined in the board file for the target * used by the transport functions, for the 'ttc' transport only * sample: beaglebone
|
|
|
= U = * USB_DEV: device filename for an block device provided by a USB device on the target * defined in the board file * used by filesystem test specs * sample: /dev/sdb1 * USB_MP: mount point for a filesystem on an USB device on the target * defined in the board file * used by filesystem test specs * sample: /mnt/usb
|
|
|
= UNDOCUMENTED (YET) = * TRIPLET * LTP_OPEN_POSIX_SUBTEST_COUNT_POS * defined in board file for a target * LTP_OPEN_POSIX_SUBTEST_COUNT_NEG * defined in board file for a target * EXPAT_SUBTEST_COUNT_POS * defined in board file for a target * EXPAT_SUBTEST_COUNT_NEG * defined in board file for a target * OF_ROOT * OF_CLASSDIR * OF_DEFAULT_SPECDIR * OF_OVFILES * OF_CLASSDIR_ARGS * OF_TESTPLAN_ARGS * OF_SPECDIR_ARGS * OF_OUTPUT_FILE * OF_OUTPUT_FILE_ARGS * OF_DISTRIB_FILE * OF_OVGEN * OF_BOARD_FILE * BATCH_TESTPLAN * OF_TESTPLAN * OF_TESTPLAN_ARGS * OF_OVFILES_ARGS
|