Variables

Contents:

This is an index of all the variables used by Fuego:

FIXTHIS - I don't have all the fuego variables documented here yet

A [edit section]

ARCHITECTURE: the processor architecture of the target board
- defined in the board file for a target
- used by toolchain and build scripts for building the tests
  - NOTE: this appears to only be used by iozone.sh
- sample: arm
ARCH: architecture used by the toolchain
- sample: arm
- set by tools.sh based on PLATFORM
AS: name of the assembler
- set by tools.sh based on PLATFORM
- commonly used during the build phase (in the function test_build)

BAUD : Baud rate to be used with the serialport
- defined in the board file for a target
- used by serial transport
- sample: "115200"
BOARD_TESTDIR : directory on the target board where test data will be placed
- defined in the board file for a target
- sample: "/home/fuego"

CC: name of the C compiler
- set by tools.sh based on PLATFORM
- commonly used during the build phase (in the function test_build)
- sample: arm-linux-gnueabihf-gcc
CONFIGURE_FLAGS: flags used with the 'configure' program
- set by tools.sh based on PLATFORM
- commonly used during the build phase (in the function test_build)
CROSS_COMPILE: cross-compile prefix used for kernel builds
- set by tools.sh based on PLATFORM
- sample: arm-linux-gnueabihf-
- NOTE: this is often $PREFIX followed by a single dash
CPP: name of the C pre-processor
- set by tools.sh based on PLATFORM
CXX: name of the C++ compiler
- set by tools.sh based on PLATFORM
CXXCPP: name of the C++ pre-processor
- set by tools.sh based on PLATFORM

FUEGO_ENGINE_PATH: root directory for fuego system (the "engine")
- sample: /home/jenkins
FUEGO_HOME: home directory on the target that fuego uses for operations
- sample: /home/a
FUEGO_LOG_PATH: root directory for test logs
- sample: /home/jenkins/logs
FUEGO_PARSER_PATH: root directory for fuego parser system
- sample: /home/jenkins/scripts/parser
FUEGO_SCRIPTS_PATH: root directory for fuego scripts
- sample: /home/jenkins/scripts
FUEGO_TESTS_PATH: root directory for fuego tests directories
- sample: /home/jenkins/tests

GEN_TESTRES_FILE: set to the value of TEST_RES, when a BATCH_TESTPLAN is in effect

IO_TIME_SERIAL: Time required for echoing the whole command and response
- defined in the board file
- used by the transport functions
- sample: 0.1
IPADDR: IP address of the target board
- defined in the board file
- used by the transport functions
- sample: 10.0.1.74

LD: name of the linker
- set by tools.sh based on PLATFORM
- sample: arm-linux-gnueabihf-ld
LOGIN: login account name for the target
- defined in the board file for the target
- used by the transport functions
- the account on the target should have sufficient rights to run a variety of tests and perform a variety of operations on the target
- sample: root

MMC_DEV: device filename for an MMC device on the target
- defined in the board file
- used by filesystem test specs
- sample: /dev/mmcblk0p2
MMC_MP: mount point for a filesystem on an MMC device on the target
- defined in the board file
- used by filesystem test specs
- sample: /mnt/mmc
MOUNT_BLOCKDEV: device filename for a block device on the target
- defined in a filesystem test spec
  - e.g. in (bonnie, fio, ffsb, iozone, synctest, aiostress, dbench, tiobench).spec
- usually references either MMC_DEV, SATA_DEV or USB_DEV, depending on what the test spec indicates to test
- sample: /dev/sda1
MOUNT_POINT: mount point for a filesystem to be tested on the target
- defined in a filesystem test spec
  - e.g. in (bonnie, fio, ffsb, iozone, synctest, aiostress, dbench, tiobench).spec
- usually references either MMC_MP, SATA_MP, or USB_MP, depending on what the test spec indicates to test
- sample: /mnt/sata

PASSWORD: password used with to login to the target board
- defined in the board file for a target
- used by the transport functions
- it can be the empty string: ""
- sample: mypass
PLATFORM: name of the target "platform" This is used to identify the toolchain used for building tests
- defined in the board file
- used in tools.sh
- sample: qemu-armv7hf
PREFIX: toolchain prefix
- set by tools.sh based on PLATFORM
- sample: arm-linux-gnueabihf
- NOTE: see also CROSS_COMPILE

REP_DIR: directory where reports are stored
- sample: /home/jenkins/logs/logruns/
REP_GEN: report generator program
- sample: /home/jenkins/scripts/loggen/gentexml.py
REP_LOGGEN: program used to generate report logs?
- sample: /home/jenkins/scripts/loggen/loggen.py

SATA_DEV: device node filename for a SATA device on the target
- defined in the board file
- used by filesystem tests
- sample: /dev/sda1
SATA_MP: mount point for a filesystem on a SATA device on the target
- used by filesystem tests
- sample: /mnt/sata
SRV_IP: IP address of server machine (host machine where fuego runs)
- defined in base-board.fuegoclass
  - obtained dynamically using the 'ip' command
- can be defined in a board file for a target, using an 'override' command
- used by networking tests (NetPIPE, iperf, netperf)
- sample: 10.0.1.1
SSH_PORT: port to use for ssh connections on the target
- defined in the board file for the target
- the default port for sshd is 22
- sample: 22
SERIAL: port to use for serial connections on the target
- defined in the board file for the target
- The device file name as detected in Docker container
- sample: ttyACM0

TESTLOG: full path to log for a particular test
- sample: /home/jenkins/logs/Functional.bzip2/testlogs/bbb.2016-06-24_18-12-53.2.log
TEST_RES: full path to JSON results file for a test
- sample: /home/jenkins/logs/Functional.bzip2/testlogs/bbb.2016-06-24_18-12-53.2.res.json
- sample contents:
TESTDIR: name of the directory for a particular test
- this is just the directory name, not the full path (see $TEST_HOME)
- this is also used as the reference parse log prefix
- sample: Functional.bzip2
TEST_HOME: full path to the root of the test directory
- sample: /home/jenkins/tests/Functional.bzip2 different platforms
TRANSPORT: type of connection between the host system and the target system
- defined in the board file for the target
- possible values: ssh, serial, ttc
  - others anticipated are: adb, lava
- used by the transport functions
- sample: ssh
TTC_TARGET: target name used with 'ttc' command
- defined in the board file for the target
- used by the transport functions, for the 'ttc' transport only
- sample: beaglebone

USB_DEV: device filename for an block device provided by a USB device on the target
- defined in the board file
- used by filesystem test specs
- sample: /dev/sdb1
USB_MP: mount point for a filesystem on an USB device on the target
- defined in the board file
- used by filesystem test specs
- sample: /mnt/usb